Jeep WRANGLER 2023 Manual page 23

Guidelines for preventing fire and electric shock:
Ensure the Portable Charging Cordset (EVSE) is

positioned so it will not be stepped on, tripped
over, or otherwise subjected to damage or
stress.
There are no user serviceable parts inside.

Do not use the Portable Charging Cordset

(EVSE) if it is visibly damaged. Contact an autho-
rized dealership for service.
Do not place fingers, or any other objects inside

the charge connector.
Do not allow children to operate the Portable

Charging Cordset (EVSE). Adult supervision is
mandatory when children are in proximity when
the Portable Charging Cordset (EVSE) is in use.
Do not use the Portable Charging Cordset

(EVSE) with an extension cord or plug adapters.
Do not unplug the Portable Charging Cordset

(EVSE) from the wall outlet during a charging
operation.
Charging Inlet Warning Label
1 — Dangerous Situation
2 — Risk Of Electric Shock
3 — Reference Owner's Information
4 — Charging Timer Set
5 — Charging Procedure In Progress
6 — Charging Procedure Complete
7 — Fault In Charging Procedure
NOTE:
During normal operation, the charge connector or
AC plug may feel warm. If either one feels hot
during charging, unplug the Portable Charging
Cordset (EVSE) and have a qualified electrician
inspect the wall outlet before you continue
charging Ú page 85.
GETTING TO KNOW YOUR VEHICLE
WARNING!
INSTRUCTIONS PERTAINING TO A RISK OF FIRE
OR ELECTRIC SHOCK: Do not use the Portable
Charging Cordset (EVSE) with an outlet that is
worn or damaged. Failure to follow this warning
can result in electrical shock, fire, property
damage, and death or serious injury.
AC L 2 C
EVEL HARGING
(240 V , 40 A )
OLT MP
AC Level 2 (240 Volt) charging requires a 240 Volt,
Level 2 Electric Vehicle Supply Equipment (EVSE)
charging station. A 40 Amp Level 2 EVSE for home
installation is recommended.
When using public charging stations, ensure the
charging station is ready to provide charge and the
vehicle is in PARK before the Level 2 EVSE is
plugged into the vehicle's charge inlet. You will
hear a "click" when the charge connector is
inserted correctly and is coupled with the vehicle's
charge inlet.
21
2