Table of Contents
Advertisement
10
GETTING TO KNOW YOUR VEHICLE
Max Regeneration
Max Regeneration is a supplemental feature of the
RBS. When activated, it will use the RBS to help
slow the vehicle when the driver releases the
accelerator pedal. This feature allows you to
moderately reduce driving speed without pressing
the brake pedal. It is always necessary to apply the
brake pedal to bring the vehicle to a complete stop.
Max Regeneration Button
This feature can be activated by pressing the
Max Regeneration button, below the radio screen.
NOTE:
The Max Regeneration feature will remain on once
selected, even after the vehicle is restarted.
E-S
M
ELECT
ODE
This system allows the driver to select different
modes by pushing the following buttons located
below the headlight switch.
E-Select Mode Switch
Hybrid: Depletes electric range first, then
gas range.
Automatically switches between using gas
and battery for greatest efficiency and
performance.
Best HVAC and acceleration performance.
Default Mode.
Electric: Prevents the engine from running,
unless you absolutely need it.
Acceleration and heating performance may
be degraded.
Engine will switch on during a Wide Open
Throttle (WOT) event, or if cruise control
requires it.
Vehicle will automatically switch to Hybrid
mode upon reaching 0% State Of Charge
(SOC) or due to system needs.
Not allowed with manual gate operation
unless in 4WD Low and Selec-Speed
Control (SSC) is active.
e-Save: Engine only. Saves the current
SOC/Electric range for later.
SOC/Electric range may increase, but will
not decrease under most driving conditions.
Under heavy load, such as while pulling a
trailer, SOC may decrease.
Engine may turn off at a stop.
You can further customize the e-Save
operation in the Radio, refer to the
Uconnect Settings section of your owner's
manual for more information.
Hide quick links:
Advertisement
Table of Contents
