Jeep WRANGLER 2023 Manual page 16

14 GETTING TO KNOW YOUR VEHICLE
An AC Power Cord with a NEMA 5–15P right

angle plug
An indoor/outdoor charge cable, EV-rated

A Status Indicator Display

Portable Charging Cordset (EVSE)
1 — Charge Connector
2 — Charge Cable
3 — AC Plug
4 — EVSE Enclosure
5 — Status Indicator Display
Grounding Instructions
For A Grounded, Cord-Connected Product:
The Portable Charging Cordset (EVSE) must be
grounded. If it should malfunction or break down,
grounding provides a path of least resistance for an
electric current to reduce the risk of electric shock.
The Portable Charging Cordset (EVSE) is equipped
with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local
codes and ordinances.
WARNING!
INSTRUCTIONS PERTAINING TO A RISK OF FIRE
OR ELECTRIC SHOCK: Do not use the Portable
Charging Cordset (EVSE) on electrical circuits
with two-prong outlets; use with improper outlets
could result in electric shock, fire, property
damage, and death or serious injury. Check with
a qualified electrician if you are in doubt as to
whether the wall outlet is properly grounded.
Do not modify the plug prongs provided with the
Portable Charging Corset (EVSE) – if it does not
fit the outlet, you must have a proper outlet
installed by a qualified electrician.
Portable Charging Cordset (EVSE)
Installation And Operating Instructions
1. Always insert the AC plug prongs of the
Portable Charging Cordset (EVSE) into a
15 A, or 20 A, 120 VAC, 60 Hz, grounded wall
outlet first. Do not use an extension cord,
outlet/plug adapter, or a worn outlet. The
Portable Charging Cordset (EVSE) will not
operate safely unless it is plugged directly
into the wall outlet.
NOTE:
The Portable Charging Cordset (EVSE) should be
plugged into a dedicated circuit, not a circuit
shared with other devices drawing electricity on
the circuit.
AC Plug And Wall Receptacle