Positioning The Seat - Exmark QUEST S Series Operator's Manual

For cutting heights above 3.5 inches (90 mm) use the
bottom hole. The rollers will still be effective against
1. Anti-scalp roller
mounting bracket
• For 50 and 54 Inch Models:
For cutting heights above 3 1/2 inches (90 mm) use the
bottom hole. The rollers will still be effective against
1. Anti-scalp roller
mounting bracket
4. Torque hardware to 27-33 ft-lb (37-45 N-m) or
loss of roller may result.

Positioning the Seat

The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
• E-Series Models:
1. Tip the seat forward.
2. Loosen the adjustment bolts.
Figure 17
scalping.
2. Cutting height
Figure 18
scalping.
2. Cutting height
g035118
1. Adjustment bolt
3. Move the seat to the desired position and
tighten bolts.
4. Tip the seat back to the closed position.
• X- and S-Series Models:
1. Push the adjustment lever towards the center
of the machine to release the seat adjuster
track (Figure 20).
g015168
1. Adjustment lever
2. Move the seat to the desired position and
release the lever to lock in that position.
33
Operation
Figure 19
Figure 20
g237245
g237277