Exmark QUEST S Series Operator's Manual page 11

This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal. It is important that each operator review the slope operation
instructions in the operator's manual and review the conditions in which the machine is being operated to determine
if the machine may be operated in the conditions that day and on that site. Changes to terrain can result in a
1. Warning—Read the Operator's Manual.
2. Cutting/dismemberment hazard of the fingers or
hand—keep hands and feet away from moving parts; keep
all guards and shields in place.
3. Thrown object hazard—Keep bystanders away, pick up
debris before operating, and keep the deflector shield
down.
144-5288
change in slope operation for any machine.
4. Runover/backover hazard—Do Not carry passengers;
5. Ramp hazard—when loading onto a trailer, do not use
6. Tipping hazard on slopes—Do Not use on slopes near
11
look behind and down when mowing in reverse.
dual ramps; only use a singular ramp wide enough for the
machine and that has an incline less than 15 degrees;
back up the ramp (in reverse) and drive forward off the
ramp.
open water; Do Not use on slopes greater than 15
degrees.
Safety
decal144-5288