Replacing Spindle Cartridge; Parts, Service Or Warranty Assistance - Delta 43-431 Instruction Manual

Limited edition 2-speed heavy duty wood shaper

Hide thumbs

Table Of Contents

Table of Contents

Disconnect tool from power source.

IMPORTANT: When replacing the spindle cartridge, loosen bolt (A) Fig. 44. Remove the cartridge. Insert new cartridge.

Tighten bolt (A) Fig. 44, ONLY 7 TO 10 foot pounds.

The spindle pulley (D) Fig. 45, and motor pulley (E) should always be aligned with each other to provide maximum belt

performance and to reduce belt wear. To check the pulley alignment, place a straight edge against the underside of both

pulleys (Fig. 45). If an adjustment is necessary, loosen the set screw (F) and move the motor pulley up or down until the

two pulleys (D) and (E) are aligned. Tighten the set screw.

Proper belt tension is approximately a 3/32" deflection when using light finger pressure on the belt between pulleys (D) and

(E) Fig. 45.

Fig. 44

A complete line of accessories is available from your Delta Supplier, Porter-Cable · Delta Factory Service Centers, and Delta

Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest

supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of

such accessories could be hazardous. For safest operation, only Delta recommended accessories

should be used with this product.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-

Cable · Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding

your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory

which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product

prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two

years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. For all refurbished Delta

product, the warranty period is 180 days. Delta may require that electric motors be returned prepaid to a motor

manufacturer's authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted

defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by

anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for

incidental or consequential damages resulting from defective products. This warranty is Delta's sole warranty and sets

forth the customer's exclusive remedy, with respect to defective products; all other warranties, express or implied, whether

of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.