Table of Contents
Advertisement
Printing Specifications
Printing method
Dot density
Printing
48/35 column mode
width
(Standard column mode)
42/32 column mode
The number
48/35 column mode
of characters
(Standard column mode)
42/32 column mode
Line spacing
*2
Maximum print speed
Multi-tone graphics printing
dpi: dots per inch
*1: Initial setting
*2: When the printer prints with the standard print density level at 25°C {77°F} and 24V.
*3: The maximum is 100 mm/s {3.94"/s} when printing ladder barcodes, 2-dimensional symbols, or multi-tone graphics.
• The print speed changes automatically depending on the applied voltage and head temperature.
• If the data transmission speed is slower than the maximum print speed, the print speed may
fluctuate and the print result may become shaded and/or dot displacement in paper feeding
may occur. Furthermore, if the data transmission speed is much slower than the maximum print
speed, intermittent printing will occur.
Paper width
Thermal line printing
203 × 203 dpi
52.5 ± 0.2 mm
{2.07 ± 0.01"}, 420 dots
52.5 ± 0.2 mm
{2.07 ± 0.01"}, 420 dots
Font A
35
*1
Font B
42
Font C
46
Special Font A
35
Special Font B
46
*1
Kanji Font A
17
Kanji Font B
Japanese: 21
Korean: 26
Font A
32
Font B
42
Font C
46
Special Font A
35
Special Font B
46
Kanji Font A
16
Kanji Font B
Japanese: 21
Korean: 26
3.75 mm {1/5"}
(initial setting, programmable by command)
300 mm/s {9.84"/s}
Up to 16 shades of gray
(when printed on Epson specified paper)
Paper width
58 mm
80 mm
72.0 ± 0.2 mm
{2.83 ± 0.01"}, 576 dots
68.3 ± 0.2 mm
{2.69 ± 0.01"}, 546 dots
*1
48
57
64
48
64
*1
24
Japanese: 28
Korean: 36
42
54
60
45
60
21
Japanese: 27
Korean: 34
*3
Appendix
118
Hide quick links:
Advertisement
Table of Contents
