Network Connection Status - Epson TM-m30III Technical Reference Manual

Paper
Power Error
LED
LED LED
k N k
k *4
O N
*1: The Power LED flashing pattern is: lighting for 4960 ms followed by a pause for 160 ms.
*2: The Error LED flashing pattern is: lighting for 160 ms followed by a pause for 2400 ms. The LED goes off
after repeating the pattern for five seconds.
*3: The Error LED flashing pattern is: lighting for 320 ms followed by a pause for 320 ms. The LED goes off after
repeating the pattern for five seconds.
*4: The Power LED flashing pattern is: lighting for 320 ms followed by a pause for 320 ms.

Network Connection Status

Ethernet Wi-Fi
LED LED
N O
N k
O N
k N
k k
N N
The LED flashing pattern is: lighting for 320 ms followed by a pause for 320 ms.
Ethernet Wi-Fi Bluetooth
LED LED LED
N N N
N N N
The printer is connected to Wi-Fi and ready for communication.
The printer is temporarily unable to communicate, such as when it is obtaining an
IP address after being connected to Wi-Fi.
A LAN cable is connected to the printer and the printer is ready for communication.
The printer is temporarily unable to communicate, such as when it is obtaining an
IP address after the LAN cable is connected.
Starting the network firmware
Not connected to a network
Chapter 1 Product Overview
Printer Status
While forced updating firmware mode is on
During turn-off process
O: ON k: Flashing N: OFF
Printer Status
24