Table of Contents
Advertisement
Connecting the USB Option
The Fiber Video Extension also incorporates an embedded USB extension in the fiber
optic cable, eliminating the need for a third party USB extension when using
Clarity® Matrix® MultiTouch interactive LCD video wall displays and other USB devices
at the video wall. The LCD modules can also provide power for Clarity Matrix
MultiTouch, eliminating the need for separate AC power connection at the video
wall.
Follow these steps to set up the USB option.
1
2
3
Clarity Matrix G3 LCD Video Wall System Installation Guide
020-1339-00H
Connect the touch sensor USB cable to a LCD Panel connected to the "LCD 1"
output on the Fiber Video Extension module.
Use the power adapter cable to connect all points of power on the touch sensor
to the 5V Aux port on any convenient LCD Panel.
Connect the touch control PC to the Fiber Video Extension module via USB
(shown below). Be sure the USB cable is connected to the same Fiber Video
Extension module as in step 1.
Fiber Video Extension Module
LCD Panel I/O
Connecting the USB Option
Page | 183
Advertisement
Table of Contents
