Removing The Cover - Planar Clarity Matrix G3 Installation Manual

The RPSM are shipped in their own box within the larger RPS box to prevent shipping
damage that may occur. If a redundant module was ordered, the N+1 bay in the RPS
must have its cover removed.

Removing the Cover

1
2
Clarity Matrix G3 LCD Video Wall System Installation Guide
020-1339-00H
#1 Bay
Loosen the two screws holding the cover in place approximately 8-10 turns.
Pinch the screws in the direction indicated by the arrows while pulling the cover
out the front of the unit.
Removing the Cover
N+1 Bay
Page | 166