Introduction; Notes - United States Stove Company KP5522-P Manual

Introduction

United States Stove Company of South Pittsburg, TN, contracted with PFS-TECO to
perform EPA certification testing on KP5522 Pellet-Fired Room Heater. All testing was
performed at PFS-TECO's Portland Laboratory. Testing was performed by Mr. Sebastian
Button.

Notes

• Prior to start of testing, 50 hours of conditioning was performed by US Stove
personnel at a medium burn setting per ASTM E2779
• Prior to start of testing, the dilution tunnel was cleaned with a steel brush.
• Filters were changed on sample train A at one hour after the test began.
• A single, integrated test run, in accordance with ASTM E2779 was performed:
o 1 Hour at Maximum Burn Setting
o 2 Hours at Medium Burn Setting (in accordance with ALT-146)
o 3 Hours at Minimum Burn Setting
Page | 4
Project # 22-753 Model: KP5522