Denso GT10Q-SR Operator's Manual page 12

• Keep the power cable of the AC adapter from any heating equipment.
Failure to do so could melt the sheathing, resulting in a fire or electrical
shock.
• Do not scratch or modify the scanner or its interface cable. Do not bend,
twist, pull, or heat the cable.
Doing so could damage the scanner or its interface cable, creating a fire
hazard.
• Do not put heavy material on the scanner or its interface cable, or allow
the cable to get pressed under heavy material.
• Do not look into the light source from the reading window or do not point
the reading window at other people's eyes.
Eyesight may be damaged by direct exposure to this light.
• Do not use the scanner if your hands are wet or damp.
Doing so could result in an electrical shock.
• Never use chemicals or organic solvents such as benzene and thinner to
clean the housing. Do not apply insecticide to the scanner.
Doing so could result in a marred or cracked housing, electrical shock or
fire.
• Do not use the scanner with anti-slip gloves containing plasticizer.
The scanner housing may be broken, creating injuries, electrical shock,
or fire.
• When disconnecting the AC adapter from the wall socket, hold the AC
adapter body not the power cable.
The power cable may be broken, resulting in a burnt AC adapter,
electrical shock, or fire.
• During electrical storm activity, always unplug the AC adapter from the
wall socket.
Exposure to power surges could result in a damaged scanner or fire.
• When taking care of the scanner, unplug the AC adapter from the wall
socket for safety.
Failure to do so could result in an electrical shock.
v