Denso GT10Q-SR Operator's Manual page 10

To System Designers:
• When introducing the scanner in those systems that could affect human
lives (e.g., medicines management system), develop applications
carefully through redundancy and safety design which avoids the
feasibility of affecting human lives even if a data error occurs.
• If smoke, abnormal odors or noises come from the scanner, immediately
switch off the host computer, unplug the AC adapter and the interface
cable, and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
• If foreign material or water gets into the scanner, immediately switch off
the host computer, unplug the AC adapter and the interface cable, and
contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
• If you drop the scanner so as to affect the operation or damage its
housing, switch off the host computer, unplug the AC adapter and the
interface cable, and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
• Never bring any metals into contact with the terminals in connectors.
Doing so could produce a large current through the scanner, resulting in
heat or fire, as well as damage to the scanner.
• Keep the AC adapter from water.
Failure to do so could cause fire or electrical shock.
• Use the dedicated AC adapter only.
Failure to do so could result in fire.
• Never use the scanner on the line voltage other than the specified level.
Doing so could cause the scanner to break or burn.
• Do not use the scanner where any inflammable gases may be emitted.
Doing so could cause fire.
• Do not scratch, modify, bend, twist, pull, or heat the power cable of the
AC adapter. Do not place heavy material on the cable or allow the cable
to get pressed under heavy material.
Doing so could break the cable, resulting in a fire.
iii