Directly Connecting To The Computer - Roland TrueVIS SG3-540 Setup Manual

Directly Connecting to the Computer

This section explains the setting procedure for connecting one computer and one machine.
Step 1: Setting the Computer's Network
Procedure
1.
Log on to Windows as the [Administrator] or a member of the [Administrators] group.
2.
Display the network connections screen.
• Windows 11
a. Click [Start]>[Settings].
b. Click [Network & Internet]>[Dial-up].
c. Click [Network and Sharing Center].
d. Click [Ethernet] or [Wi-Fi].
• Windows 10
a. Click [Start]>[Settings]>[Network & Internet].
b. Click [Network and Sharing Center].
c. Click [Ethernet] or [Wi-Fi].
3.
Click [Properties].
If a [User Account Control] window appears, click [Continue].
The [Ethernet Properties] or [Wi-Fi Properties] window appears.
4.
Select [Internet Protocol Version 4 (TCP/IPv4)], and then click [Properties].
If the [Internet Protocol] check box is clear, select it.
3. Network Settings
47
Installation