Connecting To The Computer - Roland CJ-540 User Manual

Connecting to the Computer

Ethernet Connection
RJ-45 (Ethernet) connector
Various settings are required when using this machine in a network environment. For more information, see the "Roland
PrintServer Network Settings Guide".
Connection to a Parallel Connector
When making the connection to the computer using a
printer cable, connect the printer cable at the position
shown in the figure.
* Cables are available separately. One which you are sure
matches the model of computer being used should be se-
lected.
Do not connect a telephone cable to
the RJ-45 (Ethernet) connector.
Network cable(categoly 5)
1-4 Connecting the Cables
Ethernet (10Base-T or 100 Base-TX)
Rear
Chapter 1 - Getting Started
Parallel connector
25