Table of Contents
Advertisement
e.
Remove all the fans. See "Remove a hot-swap fan" on page 93.
f.
Remove the fan cage. See "Remove the fan cage assembly" on page 95.
Step 2.
Disconnect all cables from the CFF adapter.
Step 3.
Lift the release pin.
Step 4.
Slightly slide the CFF adapter as shown and carefully lift it out of the chassis.
Figure 85. Internal CFF adapter removal
Step 5.
Loosen the two screws on the CFF adapter to separate it from its tray if necessary.
Figure 86. Internal CFF adapter tray removal
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the internal CFF adapter
Use this information to install the internal CFF RAID adapter, internal CFF HBA adapter, or internal CFF RAID
expander adapter.
ThinkSystem ST650 V2 Maintenance Manual
124
Advertisement
Table of Contents
