Diagram Of Host Machine - Alpine UTX-M06 Manual

Diagram of host machine

1 USB interface
2 Reset button
3 MICRO SD interface
4 Controller interface
5 Power lamp interface
6 Complex line interface
High level input
7
interface
Input select switch
8
interface
9 Power output interface
10 Complex line
11 Vehicle battery
On-vehicle CD/DVD
12
player
13 Controller
Vehicle battery
Used to connect USB flash disk or USB HUB.
Press and hold the button for 3 seconds to restart the host machine.
Used to connect MICRO SD card.
It can be connected to the controller for tuning.
Power lamp.
Complex connection mode integrated with 8 types of input and output interfaces
Connected to the power output of an on-vehicle CD/DVD player.
If the switch is put to "ACC", the device will be started by ACC; if put to "HOST",
the device will be started by the high voltage level input signal H1-/H1+.
Connect the external power amplifier
including 1 group of 3.5 mm socket audio input interface, 3 groups of RCA audio
output interface, USB 2.0 interface, steering wheel controller interface, and
Alpine system matching interface (for connection with DSP product).
Connect the vehicle battery.
Provide high level input signal.
By connecting the controller, play control, volume adjustment and audio source
selection can be performed.
5