Sound Setting - Alpine UTX-M06 Manual

Sound setting

You can set this device flexibly based on your preference and purpose. You can change audio settings in the
sound setting menu. Use steps 1 to 5 to choose any setting mode to change the setting.
1 Press and hold the knob for at least 2 seconds to enter the settings interface.
Turn the knob to select "Sound Effect Setting" and then short press the knob:
2
Preset Equalizer ↔ Sound Effect Setting ↔ General ↔ Bluetooth
Turn the knob to select the "Sound Effect Setting" menu and then short press the knob:
Treble ↔ Bass
*1
Volume ↔ Time Correction ↔ Divider Settings
Setting
*4
3 *1 Any change made to the "Preset Equalizer" or "Parametric Equalizer" will be reflected in the settings
of the other.
*2 When the "Divider Settings" is set to "Active Divide by 3", adjustment cannot be made.
*3 Depending on the "Divider Settings", the setting items may be different.
*4 When "Sound Effect Clear Setting" is enabled, adjustments cannot be made to the preset sound effect.
4 Turn the knob to change the setting or enter the next level, and then short press the knob.
Press
5
Press to return to the previous sound menu mode
10
↔ Mega Bass ↔ Channel Balance ↔ Fader
*1
to deactivate setting mode.
Knob
↔ Parametric Equalizer ↔ Input Source
*2
↔Sound Setting Storage ↔ Sound Effect Clear
*3
.