Radio Law On Bluetooth - Alpine UTX-M06 Manual

Radio law on Bluetooth

Regulatory requirements of radio law on Bluetooth:
China
30
1. Technical indicators of this product:
· Use frequency: 2.4-2.4835 GHz
· Equivalent isotropically radiated power (EIRP):
Antenna gain < 10dBi: ≤100mW or ≤20dBm
· Maximum power spectral density:
Antenna gain < 10dBi: ≤20dBm/MHz (EIRP)
· Carrier frequency tolerance: 20 ppm
· Out of band emission power (out of the 2.4-2.4835 GHz frequency band):
≤-80dBm/Hz (EIRP)
· Spurious emission (radiation) power (out of corresponding carrier ± 2.5 times channel
bandwidth):
≤-36dBm/100kHz (30-1000MHz)
≤-33dBm/100kHz (2.4-2.4835GHz)
≤-40dBm/1MHz (3.4-3.53GHz)
≤-40dBm/1MHz (5.725-5.85GHz)
≤-30dBm/1MHz (Other 1-12.75 GHz)
2. No emission frequency change or emission power increase (including the addition of RF
power amplifier) is allowed without permission. No use of an external antenna or switch to
another emission antenna without permission is allowed;
3. No harmful interference to various lawful radio communication services shall be produced
during the use; once interference is found, the use shall be stopped immediately and shall not
be resumed before measures are taken and the interference is eliminated;
4. For the use of micro power radio devices, the interference of various radio services or the
radiated interference of devices for industrial, scientific, and medical use must be tolerated.
5. Use near an aircraft or airport is forbidden.