Table of Contents
Advertisement
General setting
You can set this device flexibly based on your preference and purpose. In the general setting menu, you can
change the general settings, display settings and so on. Use steps 1 to 6 to choose any setting mode to change
the setting.
1
Press and hold the knob for at least 2 seconds to enter the settings interface.
Turn the knob to select the desired item and then press the knob:
2
Preset Equalizer ↔ Sound Effect Setting ↔ General ↔ Bluetooth
Turn the knob to select General, and then press the knob:
3
Auxiliary audio source ↔ Built-in power amplifier ↔ Steering wheel controller learning ↔ Alpine system
matching ↔ Dimmer control ↔ Language setting ↔ Restore factory settings ↔ About
In the setting interface, press and hold
4
electrical test mode:
Firmware update ↔ Dealer setting ↔ Serial number
5
Turn the knob to change the setting and then press the knob.
Press
6
Caution: Press
12
to deactivate setting mode.
to return to the previous sound menu mode.
Knob
, knob, and
for more than 2 seconds each in sequence to call the
Advertisement
Table of Contents
