Roland FP-E50 Reference Manual page 42

Using the Chord Sequencer
Clear (Clear Measure)
This erases (clears) the measures in the selected range.
Item Value
[ ä ] [ å ] buttons
[Dec] [Inc] buttons
Max. number of
measures from
Start Position
pattern 1 to the
current pattern
Max. number of
measures from
End Position
pattern 1 to the
current pattern
Chord,
Target
Variation, All
Cut (Cut Measure)
This cuts the measures in the selected range.
Item Value
[ ä ] [ å ] buttons
[Dec] [Inc] buttons
Max. number of
measures from
Start Position
pattern 1 to the
current pattern
Max. number of
measures from
End Position
pattern 1 to the
current pattern
Copy (Copy Measure)
This copies the measures in the selected range.
Item Value
[ ä ] [ å ] buttons
[Dec] [Inc] buttons
Max. number of
measures from
Start Position
pattern 1 to the
current pattern
Max. number of
measures from
End Position
pattern 1 to the
current pattern
Explanation
Specifies the range of measures to
erase.
When this is executed, the
measures from the start position to
the end position are erased.
Selects what to erase.
Explanation
Specifies the range of measures
to cut.
When this is executed, the
measures from the start position to
the end position are cut.
Explanation
Specifies the range of measures to
copy.
When this is executed, the
measures from the start position to
the end position are copied.
Paste (Paste Measure)
This pastes the measures that you cut/copied into the specified position.
The number of measures that are inserted or overwritten depend on how
many measures you cut or copied.
Item Value
[ ä ] [ å ] buttons
[Dec] [Inc] buttons
Paste Position 1–Last
Insert
Paste Mode
Overwrite
Repeat Count 1, 2, 3, –63, 64
Use the [ ä ä ] [ å å ] buttons to select "EXECUTE", and then
3.
press the [Enter] button .
4.
Press the [Exit] button to return to the previous screen .
Undoing an Editing Operation
Here's how to cancel the result of an editing operation and return to
the state before that operation was executed (Undo).
You can also cancel the Undo operation (Redo).
MEMO
The Edit Menu shows the commands for which "Undo" or "Redo"
applies. If neither operation is available, "Undo/Redo" appears in gray.
Undoing an editing operation (Undo)
1.
Press the [Exit] button on the edit screen to return to
the Edit Menu .
2.
On the Edit Menu, select "Undo" and then press the
[Enter] button .
Undoes the edit you just made and returns to the previous state.
Reverting an undo operation (Redo)
1.
Right after you execute undo, select "Redo" on the Edit
Menu and press the [Enter] button .
The edit you just made is undone, and the data goes back to the way it was.
MEMO
Once you edit the data after an undo, the redo operation becomes
unavailable.
42 42
Explanation
Specifies where to paste the
measures.
The measures that you cut/copied
are inserted at the paste position,
and all following measures are
moved after the newly inserted
measures.
The measures that you cut/copied
are pasted at the paste position,
overwriting the contents. Any
existing data is lost.
Sets how many times to repeat the
paste operation.
For instance, when you insert four
measures that you cut/copied with
the Repeat Count set to "2", the
four measures are pasted twice
(eight measures total).
(Undo/Redo)