Assigning Functions To The Wheels (Wheel Setting) - Roland FP-E50 Reference Manual

Editing a Scene (Scene Edit)
Assigning Functions to the Wheels
(Wheel Setting)
You can assign the functions you want to control to wheels 1 and 2.
On the Scene Edit screen, use the [ ä ä ] [ å å ] buttons to
1.
select "Wheel Setting" and press the [Enter] button .
The Wheel Setting screen appears.
Use the [ ä ä ] [ å å ] buttons to select the parameter, and
2.
then use the [Dec] [Inc] buttons to change the value .
Parameter Value
Pitch Bend/
Mod.
Wheel Mode
Assignable
OFF
ON
Wheel LED
Arranger Beat
Bend Range
0–24
OFF
Pitch Bend (*1) Controls the pitch bend.
Modulation
(*2)
Layer (*2)
Wheel1
Bass Inversion
Function
(*4)
Arranger Hold
(*4)
Activity Level
(*3)
Rotary Speed
(*5)
Right & Left
Wheel1
Right
Part
Left
Explanation
Wheel 1 controls the pitch
bend, and wheel 2 controls the
modulation.
The wheels respectively control the
functions assigned to each.
The wheel LED always stays off.
The wheel LED always remains lit.
Blinks in time with the beat of the
auto-accompaniment, when auto-
accompaniment is on.
The LED goes dark when auto-
accompaniment is off.
Sets the amount of change
(in semitones) made by the pitch
bend.
* Enabled when "Wheel Mode" is set to
"Bend/Mod Mode".
* Enabled when "Wheel Mode" is set to
"Assignable" and when "Pitch Bend", "Bend
Up" or "Bend Down" is selected for "Wheel
1/2 Function".
No function set
Controls the modulation depth.
Controls the layer volume in Dual
mode.
Switches Bass Inversion on/off.
Switches Arranger Hold on/off.
Switches the Activity Level.
Switches between rotary speeds.
Upper part and lower part
Upper part only
Lower part only
Parameter Value
OFF
Bend Up
Bend Down
Modulation
Layer
Expression
Bass Inversion
Wheel2
Arranger Hold
Function
Activity Level
Drums Part Vol Controls the drum part volume.
Bass Part Vol
Accomp Part
Vol
Rotary Speed
Mic FX
Formant
Right & Left
Wheel2
Right
Part
Left
* 1 Changes the pitch continuously in the positive direction when bending the
wheel up, and in the negative direction when bending the wheel down .
* 2 Changes the pitch continuously in the positive direction when bending the wheel up,
and also in the positive direction when bending the wheel down .
* 3 Works as a trigger (INC when the wheel is bent up, and DEC when the wheel is bent
down) . Nothing happens when the spring-loaded wheel position returns to center .
* 4 Turns ON when the wheel is moved up from center position, and turns OFF when the
wheel is moved down from center position . Nothing happens when the spring-loaded
wheel position returns to center .
* 5 The rotary effect alternately speeds up and down, regardless of which direction the
wheel is moved . Nothing happens when the spring-loaded wheel position returns to
center .
3.
If you want to save the edited settings, execute the
Write operation .
Ø "Saving a Scene (Scene Write)" (p. 27)
MEMO
If you switch to a different scene, or turn off the power after editing the
settings, the edited settings are lost . If you want to keep the data, you
must save it .
63 63
Explanation
No function set
Controls the pitch bend up.
Controls the pitch bend down.
Controls the modulation depth.
Controls the layer volume in Dual
mode.
Controls the expression.
Switches Bass Inversion on/off.
Switches Arranger Hold on/off.
Switches the Activity Level.
Controls the bass part volume.
Controls the accompaniment part
volume.
Switches between rotary speeds.
Controls the mic FX (effect)
formant.
Upper part and lower part
Upper part only
Lower part only