Rf560Vpn Front Panel - Multitech RouteFinder RF560VPN User Manual

RF560VPN Front Panel

LEDs
Link ACT
100/10
FDX COL
Serial Data
Serial DCD
WAN 100
WAN Link /
ACT
Status
Power
Multi-Tech Systems, Inc. RF560VPN User Guide
RF560VPN Light Panel
Description
Lights when the LAN client is correctly connected to the Ethernet port. Blinks
when there is activity on the Ethernet port.
Lights when the LAN client is connected at 100MB.
Off when the LAN client is connected at 10MB.
Lights when the LAN client is connected as full duplex.
Off when the LAN client is connected as half duplex. Blinks when there are
collisions on the network.
Blinks when the Serial async port is receiving or transmitting data.
Lights when the Serial async port is properly connected to a remote site.
Lights when a successful connection to the 100BaseT WAN is established.
Off when connected to the 10BaseT.
Lights when the LAN port has a valid Ethernet connection. Blinks when it is
receiving or transmitting data.
Blinks when it is starting, saving the configuration, or performing a firmware
update. Normally, it should be off.
Lights when power is being supplied to the router.
Chapter 1 – Introduction and Description
8