Table of Contents
Advertisement
6. The Select Program Folder dialog box is displayed.
Ensure that MultiFRAD 100 is highlighted and click Next >.
7. The MultiFRAD - 100 Series dialog box is displayed.
Ensure that the correct COM port (connected to the Command port on the MultiFRAD) is
selected. If not, from the Select Port window, click on the down arrow and choose the COM port
of your PC.
Click OK to continue.
8. The Setup Complete dialog box is displayed.
Click Finish to continue.
FR111A
Chapter 3 - Software Loading and Configuration
21
Advertisement
Table of Contents
