Table of Contents
Advertisement
Chapter 4 - MultiFRAD Software
Configuration Port Setup
The Configuration Port Setup utility allows you to set up and configure the command port on your
MultiFRAD. This dialog is included in the initial installation process. Although parameters can be
changed, be sure to note the current status of the software before making any alterations.
When you installed the MultiFRAD software, you selected which COM port to use with the
configuration port setup. You can assign another COM Port and define the modem Init String, Dial
String, and various other responses. For more information on each individual parameter, refer to the
on-line Help provided with the software.
Download Firmware
This utility allows you to download the firmware to the MultiFRAD. This may be necessary in the case
of repair or upgrade. To download the firmware, choose Download Firmware from the MultiFRAD
program group, and the Open dialog box is displayed (if the MultiFRAD is running, you will be
queried to reboot to update firmware; click OK to proceed and the Open dialog will be displayed).
By default, the software will display the proper firmware from the MultiFRAD folder. Double click this
file in the File Name list.
The Downloading Code dialog is displayed, which includes a status bar to monitor the download.
When the download is complete the MultiFRAD will reboot. This process will take several minutes.
After rebooting, you will be returned to Windows.
Uninstall MultiFRAD Configuration
Selecting Uninstall MultiFRAD Configuration will allow you to completely remove all the components
of the MultiFRAD program group. Upon selecting this option you will be queried for confirmation.
Click Yes to continue with the uninstall, or click No to abort.
FR111A
27
Advertisement
Table of Contents
