APRILIA ETX 150 Service Station Manual page 49

ETX - STX 150
TABLE A1: REAR LIGHT UNIT
•
Pass the cable harness of the taillight
(4) below the rear frame, in the indica-
ted points
TABLE A2: REAR LIGHT UNIT
•
Place the connectors of the rear light
assembly in the protective casing, un-
der the frame in the indicated points
and lock the cable harness with a
clamp (5)
TABLE B: REAR STOP SWITCH
1. Rear stop switch
2. Rear stop switch cable harness
•
Fasten the cable harness to the swing-
arm by a clamp (3)
TABLE B1: REAR STOP SWITCH
2. Rear stop switch cable harness
3. Rear stop switch connector
•
Fix the cable harness to the frame with
two clamps (4)
Electrical system
ELE SYS - 49