APRILIA ETX 150 Service Station Manual page 157

ETX - STX 150
•
Remove the three anchoring pins (2) of
the side fairing from the motorcycle
and remove it
REPEAT THE OPERATION ON THE OPPOSITE
SIDE
License plate holder
PLATE HOLDER REMOVAL
•
Remove the clamp (1) fixing the con-
nectors of the rear light unit (taillight,
turn indicators, licence plate light) and
free the wiring
•
Remove the three fixing screws (2) of
the license plate holder support frame
(3)
•
Remove the two fixing screws (4) of the
licence plate holder (5)
Bodywork
BODYW - 157