SECTION 2
Windows 98SE
2-12
Windows 98 and ME DHCP Server Configuration
After your initial configuration has been completed, you may need to
setup your PC for using a DHCP server, using the procedure below.
1
Follow Steps 1 through 6 from above.
2
Select Obtain an IP address automatically.
3
Click OK and then complete the procedure by following steps 10
through 12.
Configuring Windows 2000
1
Click Start.
2
Select Settings.
3
Select Control Panel.
4
Double-click Network and Dial-Up Connections.
SECTION 2, INSTALLATION
INSTALLATION
Windows ME