Motorola WE800G User Manual page 46

CONFIGURATION
Field Description
Key Index There are up to different 4 Keys (1, 2, 3, or 4)
that can be selected, the amount determined by
what is selected in the ESS Auth Mode or
Encryption Status fields.
You are selecting one of the Key Content fields
below. The Key selected here must match
between the WE800G and the AP in
Infrastructure mode and other clients in Ad-Hoc
mode. For example, if you select Key 1 here
you have to match Key 1 of the AP.
Select the option that best matches your needs.
The default is 1.
Key Content There are up to four fields available (Key 1 –
Key 4) that can be filled. The Key Content
Key 1
format is selected in the Key Input Method field.
Key 2
For the key content, the phrase is
Key 3
auto-generated by the password entered in the
Passphrase field. For non-Motorola clients, you
Key 4
will use these Keys (and not Passphrase) when
using WEP for security.
If you have selected Hexadecimal or ASCII
formatting (in the Key Input Method field), you
can then enter your own Hexadecimal or ASCII
keys. If entering keys manually, this also
depends on whether WEP64 or WEP128 is
selected in the Encryption Status field.
!
!
If entering a key manually, don't leave a key
field blank or enter all 0's. These are not secure
keys.
SECTION 3, CONFIGURATION
For WEP64 keys, 5 case sensitive ASCII
characters are allowed or 10 hexadecimal
characters (using only characters 0-9 and
A-F).
For WEP128 keys, 13 case sensitive ASCII
characters are allowed or 26 hexadecimal
characters (using only characters 0-9 and
A-F).
SECTION 3
3-9