Control Panel - Device Security - Motorola WE800G User Manual

SECTION 3
3-14
Field
Connection Mode
Connection Status
IP Address
Subnet Mask
Gateway IP
Control Panel – Device Security
This screen enables you to change your User ID and password and
enables you to manage your Wireless Ethernet Bridge remotely.
To access the screen, click Control Panel > Device Security. Click
APPLY to save your settings or CANCEL to cancel changes.
SECTION 3, CONFIGURATION
Description
Select a connection mode. The options are
DHCP or Static Assigned.
Provides current information about the
connection status of the Wireless Ethernet
Bridge.
This is the IP address you use to connect to
the unit. If connecting to a DHCP server, the
IP address will appear here. If using Static
Assignment, enter the IP address here.
This is the Subnet Mask address you use to
connect to the unit. If connecting to a DHCP
server, the Subnet Mask address will appear
here. If using Static Assignment, enter the
Subnet Mask address here.
This is the Gateway IP address the device
will use to connect back to you. If connecting
to a DHCP server, the Gateway IP address
will appear here. If using Static Assignment,
enter the Gateway IP address here.
CONFIGURATION