Starting Up The Projector - BenQ GV10 User Manual

Starting up the projector

1. Charge the battery or supply power to the projector as indicated in
2. For first time usage, before turning on the projector, ensure that the power cord is securely connected. Charge the projector for up to 2 hours
before turning it on for the first time, or charge the projector for up to 4 hours during the first usage (see
information on LED behavior).
3. Push the power switch up on the right side of the projector. The Power indicator LED will light up and you can start using the projector.
4. As long as the power switch remains on, you can use the power button
be using the projector for an extended period of time, switch the power off to save power.
When supplying power directly to the projector please use the supplied power cable to avoid possible dangers such as electric shock and fire.
5. The fans will start operating and a start-up image will be shown while the projector warms up. This process may take a few minutes. The
projector does not respond to further commands while it is warming up.
6. You may connect a device to the projector to project video. See
Charging the battery on page
on the remote control to turn the projector on or off. If you will not
I I
Connections on page 27 for more information.
22
21.
LED indicators on page 15
1 second
for more