Yamaha TMAX XP560 Manual page 46

Instrument and control functions
Engine stop switch "
Set this switch to "
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as in the event of an overturn
or if the throttle is stuck.
Power on/Starter switch " "
With the smart key turned on and with-
in range, press the " /LOCK" section
of the center switch to turn on the pow-
6
er to the vehicle. Then with the side-
stand up and while applying the front
or rear brake, push this switch to crank
the engine with the starter. See page
8-2 for starting instructions prior to
starting the engine.
TIP
If the power does not turn on when
pressing the " /LOCK" section of the
center switch, try using the " "
switch.
EAU97550
/ " Hazard switch " "
" before starting With the vehicle power is on, use this
" to switch to turn on the hazard lights (si-
multaneous flashing of all turn signal
lights).
The hazard lights are used in case of an
emergency or to warn other drivers
EAU95661 when your vehicle is stopped where it
might be a traffic hazard. Hazard lights
can be turned on/off only when the ve-
hicle power is on.
NOTICE
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
Cruise control switches (XP560D)
See page 6-5 for an explanation of the
cruise control system.
Drive mode switch "MODE"
See page 6-26 for an explanation of
the drive mode.
EAU95651
Joystick and Home Button
The joystick/home button located on
the left handlebar is used to control the
pop-up menu system, navigation sys-
tem, and the vehicle information dis-
play.
ECA10062
1. Joystick
2. Home Button "
This manual uses the following terms
EAU84251
to describe operations:
Short press
HB "
Long press
HB "
EAU84260
Short press
enter "
Long press
enter "
6-2
1
2
"
Briefly press the home
" button
Press the home button for
1 second
"
Briefly press the joystick
straight inward
"
Press the joystick straight
inward for 1 second
"
EAU95874