Emergency Mode - Yamaha TMAX XP560 Manual

Emergency mode

When the smart key is lost or dam-
aged, or its battery has discharged, the
vehicle can still be turned on and the
engine started. You will need the smart
key system identification number. To
operate the vehicle in emergency
mode, carry out the following steps.
1. Stop the vehicle in a safe place.
2. Push the " /LOCK" section of
the center switch for 5 seconds
until the smart key system indica-
tor light flashes once, then release
it. Repeat two more times. The
smart key system indicator light
will come on for three seconds to
indicate the transition to emergen-
cy mode.
Periodic maintenance and adjustment
EAU95981
1 1 1
1. " /LOCK" section of the center switch
1 1
SET
1. Smart key system indicator light "
3. After the smart key system indica-
tor light
the " /LOCK" section of the cen-
ter switch to enter the identifica-
tion number.
9-39
1. Identification number
4. Inputting the identification number
"
goes off, use
1
is done by counting the number of
flashes of the smart key system in-
dicator light.
For example, if the identification
number is 123456:
Push and hold the " /LOCK"
section of the center switch.
↓
The smart key system indicator
light will start to flash.
↓
9