Yamaha TMAX XP560 Manual page 50

Instrument and control functions
2. Push the "SET–" side of the cruise
control setting switch to activate
the cruise control system. Your
current traveling speed will be-
come the set cruising speed. The
cruise control setting indicator
light " " will come on.
Adjusting the set cruising speed
While the cruise control system is op-
erating, push the "RES+" side of the
cruise control setting switch to in-
6
crease the set cruising speed or the
"SET–" side to decrease the set speed.
TIP
Pushing the setting switch once will
change the speed in increments of ap-
proximately 2.0 km/h (1.2 mi/h). Hold-
ing down the "RES+" or "SET–" side of
the cruise control setting switch will in-
crease or decrease the speed continu-
ously until the switch is released.
You can also manually increase your
traveling speed using the throttle. After
you have accelerated, you can set a
new cruising speed by pushing the
"SET–" side of the setting switch. If you
do not set a new cruising speed, when
you return the throttle grip, the vehicle
will decelerate to the previously set
cruising speed.
Deactivating the cruise control sys-
tem
Perform one of the following opera-
tions to cancel the set cruising speed.
The " " indicator light will turn off.
 Turn the throttle grip past the
closed position in the deceleration
direction.
1. Deceleration direction
 Apply the front or rear brake.
TIP
Traveling speed decreases as soon as
the cruise control system is deactivat-
ed; unless the throttle grip is turned.
6-6
Using the resume function
Push the "RES+" side of the cruise
control setting switch to reactivate the
cruise control system. The traveling
speed will return to the previously set
cruising speed. The "
light will come on.
WARNING
It is dangerous to use the resume
function when the previously set
cruising speed is too high for current
conditions.
Turning off the cruise control sys-
tem
1 1 1
Push the
switch "
trol system. The "
and the "
off.
TIP
Whenever the cruise control system or
the vehicle power is turned off, the pre-
viously set cruising speed is erased.
You will not be able to use the resume
function until a new cruising speed has
been set.
" indicator
EWA16351
cruise control power
" to turn off the cruise con-
" indicator light
" indicator light will turn