Yamaha TMAX XP560 Manual page 102

Periodic maintenance and adjustment
1 1 1
9
1. Rubber cover
TIP
After removing the panel, make sure
that the rubber caps remain attached.
To install the panel
1. Insert the tabs on the upper left
and right sides of the panel.
2. Align the center and lower projec-
tions and then push the panel into
its original position.
1 1
3. Install the quick fasteners.
Panel B
To remove the panel
1. Remove the screw.
1. Panel B
2. Screw
2. Gently pry up the upper portion of
To install the panel
Place the panel in the original position,
and then install the screw.
9-10
1
2
the panel, and then slide the panel
upwards.