Tv Operation And Features; Choosing A Viewing Source; Sleep Timer - Mitsubishi LaserVue L65-A90 Owner's Manual

30

TV Operation and Features

4
Choosing a Vi ewing Source
Input Selection menu
Choose a viewing source from the Input Selection
menu. The current TV input appears as a full-color icon
in this menu.
1.
Press INPUT to display the Input Selection menu. If
there are only two inputs to the TV, INPUT switches
between them without displaying the menu.
2.
Highlight an input icon using
3.
Press ENTER to switch to the input and close the
menu.
More About the Input Selection Menu
• To assign meaningful names to the icons, see the
Inputs > Name menu, 51 .
• To rearrange the icons, see the Inputs > Order
menu, 51 .
TV Tips
Turning the TV On or Off
To turn the TV on or off, point the remote control at the
front of the TV and press the POWER key. Alternatively,
press the POWER button on the TV's control panel.
Controlling Sound Volume
• Press VOL /
• See also "Controlling A/V Receiver Sound Volume" on
page 18 .
Changing Channels (antenna sources)
To change channels:
• Enter the channel number using the number keys
on the remote control and press ENTER. For a two-
.
to adjust the sound level.

Sleep Timer

The Sleep Timer turns the TV off after the length of time
you set. To set the TV to turn on at a certain time, see
the Setup > Timer menu on page 49 .
Setting the Sleep Timer
1.
Press SLEEP on the remote control.
2.
Press SLEEP additional times to increase the time in
30-minute increments up to the maximum of 120
minutes.
3.
Press EXIT or wait five seconds without pressing any
keys for the message to disappear.
4.
Press SLEEP to view the time remaining before the
sleep timer turns off the TV.
Cancelling the Sleep Timer
1.
Press SLEEP to display the on-screen message.
2.
Press SLEEP repeatedly until OFF is displayed.
Note: After fi ve seconds of inactivity, the message box
will disappear.
part digital channel, such as 3-1, press 3
to enter a dash (separator).
• Press CH/PAGE / to change channels one
channel at a time.
• Press and hold CH/PAGE
through channels.
• Press QV (QuickView) to switch back to the previ-
ously tuned channel.
• Press GUIDE to display ChannelView channel listings,
highlight a channel, and press ENTER.
• Use the Fav (Favorites) feature to set up lists of
favorite channels and tune to them with the FAV key.
See Setup > Edit > Fav1–Fav6 on page 47 .
NOTE: Perform channel memorization (a channel scan)
to make fi nding channels easier. See Setup >
Scan, page 46 .
—
CANCEL 1
/ to move quickly