Table of Contents
Advertisement
Re mote Control
1. POWER: Turns TV power on and off.
2. Slide Switch: Selects the A/V device to be oper-
ated by the remote control. Set the slide switch to TV
for operation of the TV, and NetCommand-controlled
devices. Control of additional devices requires pro-
graming (see Appendix C , " Programming the Remote
Control ."
3. SLEEP: Sets the TV to turn off within 2 hours in incre-
ments of 30 minutes.
4. Digits/Letters: Press digits for channel numbers,
then press ENTER for faster tuning. Use numbers and
—
the
CANCEL key to enter digital sub-channel numbers.
Use also for entering letters or names in menus.
To select letters when naming channels, repeatedly
press the associated number key. Press ENTER to set
the letter. Special characters are available with the 1
key (!, &, blank space) and 0 key (/, * , -).
5. —/CANCEL (SUB-CHANNEL/CANCEL): When entering digital
channel numbers, adds a separator between main
and sub-channel numbers. Clears Fav and some
menu entries.
6. QV ( QuickView
™
): Switches between the current
channel and the last channel viewed.
7. MUTE: Turns TV sound on and off.
8. SPLIT: Not used in this model.
9. FAV (Favorites): Scans through memorized lists of
favorite channels. See Setup > Edit > Fav1–Fav6
on page 47 .
10. VOL
/
(Volume Up/Down): Changes sound level.
11. CH/PAGE
/
(Channel or Page Up/Down):
up or down through memorized channels. Pages
up and down through screens when used with
ChannelView.
12. FORMAT: Changes the shape and size of the TV picture.
13. LIST: Works like the LIST key for a cable box or satellite
receiver when "learned" for Net Command or when the
remote has been programmed for the device.
14. INPUT: Displays the Input Selection menu from which
you can select an input source to view, such as an
antenna input (ANT 1/2) or a connected device.
15.
( Adjust Up/Down/Left/Right): Navigate
menus and change settings.
16. ENTER: Selects a channel number or menu item.
17. GUIDE: Displays or removes ChannelView™ channel
listings for ANT 1 and ANT 2. Displays DVD disc or
top menu for a NetCommand-controlled DVD player.
Displays the guide for a NetCommand-controlled
cable box or satellite receiver.
18. INFO: Displays an on-screen summary of the current
device in use and any broadcast information avail-
4. TV Operation and Features
2
3
4
5
7
8
10
11
17
18
24
25
26
27 28
29
Scans
23
able, including current V-Chip ratings information.
See "Status Display" on page 33 for details.
19. AUDIO: Selects individual audio settings to adjust.
See page 44 for a description of audio settings.
20. VIDEO: Selects individual video settings to adjust.
See page 42 for a description of video settings.
21. MENU: Displays the main TV menu. When a sub-
menu is open, backs up one menu level.
22. EXIT: Closes TV on-screen menus/displays.
23. F1–F4
For devices under Net Command control:
Perform Net Command "Learning" to assign your
choice of functions to the F1–F4 keys.
31
1
6
9
12
13
14
15
16
19
20
21
22
Advertisement
Table of Contents
