Table of Contents
Advertisement
Resetting HDMI Control or Removing an HDMI
Device (Figure 6)
1.
Power off the device.
2.
Disconnect the HDMI cable.
3.
Press
MENU on the TV remote control to enter the TV
Main menu.
4.
Select the
Inputs menu using the
5.
Select the
Inputs > Name menu using the
6.
Highlight the device to reset using the
then the
key.
7.
With the device highlighted, select
HDMI Control.
8.
Press
EXIT to clear the menus.
9.
To display the
Auto Input Sensing screen, recon-
nect the device. You may need to power on the
device for it to be detected.
Figure 6. Inputs > Name menu with AVR DVD deleted.
Using Net Command H DMI Control
As an example of using Net Command for HDMI
devices, you would press PLAY on the device itself to:
•
•
•
keys.
Test your equipment with the TV's remote control to
key.
find out which commands are supported. See the table
key and
below for commands that may be available, depending
on the individual device.
Delete to reset
CEC-enabled VCR, DVD, and DVR functions that
may be available:
Record/
Playback
*
If you have a CEC-enabled A/V receiver, CEC-enabled
devices connected to the A/V receiver with an HDMI
cable may also be controllable. They can be selected
from the TV's Input Selection menu.
CEC-enabled A/V receiver functions that may be
available:
•
•
You can use Net Command IR "learning" to add com-
mands to those supported by CEC. You must first
connect and place IR emitters for the devices.
Appendices
Turn on the TV if not already on
Switch to the device (no need to display the
Selection menu)
Begin play of the device
Menu
Navigation
ENTER
Digits 0–9,
—
CANCEL
(to cancel)
The F1 key defaults to work like the device's LIST key.
Try the
VOL, MUTE, and menu-navigation keys.
To open the A/V receiver menu, follow these steps:
1.
While watching TV, press
2.
Press
repeatedly until the Speakers option
displays.
3.
While
Speakers is still displayed, press MENU.
Input
Channel Tuning
Other
CH
/
GUIDE
—
F1 (content)
CANCEL
ENTER
MENU
AUDIO.
81
*
Advertisement
Table of Contents
