Using Memory Function; Viewing The Readings Stored In Memory - Omron M7 Intelli IT Instruction Manual

5. Using Memory Function

Your monitor automatically stores up to 100 readings per user.
Note
•This monitor can be used by multiple users. Refer to sub-section 2.7
to switch user. Make sure which user ID stores your own readings.
5.1

Viewing the Readings Stored in Memory

Your monitor has "comparison mode" view function, that shows you
the latest reading and the past reading at the same time.
1. Select your user ID.
2. Press the
The readings appear in comparison mode as below.
If the past reading was
taken in Afib mode, the
" " and "
the only "
appear. The reading
shown on the left is
the average of 3
measurements.
After a memory number appears, the latest reading will
appear with a past reading. A past reading will appear in the
comparison display on the left.
button.
Memory number
" symbols or
" symbol
1 sec.
Past reading
If the latest reading was
taken in Afib mode, the
" " and "
symbols or the only
" " symbol appear.
The reading shown on
the right is the average of
3 measurements.
Alternating
date/time
display
Latest reading
"
EN
EN34