Omron M7 Intelli IT Instruction Manual page 45

Display/
Problem
The monitor cannot
connect to a smart
device or transmit data
correctly.
appears
The monitor is waiting
for pairing with the smart
device.
flashes
The monitor is ready to
transfer your readings to
flashes
the smart device.
There are more than 80
readings in memory to
be transferred.
flashes
The date and time is not
set.
There are 100 readings
in memory to be
transferred.
appears
Batteries are low.
flashes
7. Error Messages and Troubleshooting
Possible Cause Solution
Follow the instructions
shown in the "OMRON
connect" app. If the "Err"
symbol still appears after
checking the app, contact
your OMRON retail outlet
or distributor.
Refer to sub-section 4.1
for pairing your monitor
with your smart device, or
press the [START/STOP]
button to cancel pairing
and turn your monitor off.
Open the "OMRON
connect" app to transfer
your readings.
Pair or transfer your
readings to the "OMRON
connect" app so you can
keep them in memory in
the app, and this error
symbol disappears.
Replacing all 4 batteries
with new ones is
recommended. Refer to
sub-section 2.1.
EN
EN44