Using Your Monitor Without A Smart Device; Taking A Measurement - Omron M7 Intelli IT Instruction Manual

3. Using Your Monitor without a Smart Device

3.1

Taking a Measurement

You can use your monitor without pairing to a smart device. To pair
your monitor with a smart device, refer to sub-section 4.1.
Note
•To stop the measurement, press the [START/STOP] button once to
deflate the arm cuff.
Caution
• DO NOT use this monitor with other medical electrical (ME) equipment
simultaneously. This may result in incorrect operation of the devices and/or
cause an inaccurate reading.
• Remain still and DO NOT talk while taking a measurement.
1. Press the [START/STOP] button.
All symbols appear on the display before starting the
measurement.
2. Remain still and do not talk until the entire
measurement process is complete.
The "
Note
• The "
the arm correctly.
• When the "
applied correctly. Press the [START/STOP] button to turn
your monitor off, then apply the cuff correctly.
" symbol flashes at every heartbeat.
" symbol appears if the arm cuff is wrapped around
" symbol is displayed, the arm cuff is not
EN
EN26