Omron M7 Intelli IT Instruction Manual page 7

Automatic upper arm blood pressure monitor
Hide thumbs Also See for M7 Intelli IT:
Table of Contents

Advertisement

Available languages

Available languages

• Plug the AC adapter into the appropriate voltage outlet. DO NOT use in a
multi-outlet plug.
• NEVER plug in or unplug the AC adapter from the electric outlet with wet
hands.
• DO NOT disassemble or attempt to repair the AC adapter.
Battery Handling and Usage
• Keep batteries out of the reach of infants, toddlers and children.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury to the user or
Caution
patient, or cause damage to the equipment or other property.
• Stop using this monitor and consult with your physician if you experience
skin irritation or discomfort.
• Consult with your physician before using this monitor on an arm where
intravascular access or therapy, or an arterio-venous (A-V) shunt, is present
because of temporary interference to blood flow which could result in injury.
• Consult with your physician before using this monitor if you have had a
mastectomy.
• Consult with your physician before using this monitor if you have severe
blood flow problems or blood disorders as cuff inflation can cause bruising.
• DO NOT take measurements more often than necessary because bruising,
due to blood flow interference, may occur.
• ONLY inflate the arm cuff when it is applied on your upper arm.
• Remove the arm cuff if it does not start deflating during a measurement.
• When the monitor malfunctions, it may get hot. DO NOT touch the monitor if it
occurs.
• DO NOT use this monitor for any purpose other than measuring blood
pressure and/or detecting the possibility of Afib.
• During measurement, make sure that no mobile device or any other electrical
device that emits electromagnetic fields is within 30 cm of this monitor. This
may result in incorrect operation of the monitor and/or cause an inaccurate
reading.
• DO NOT disassemble or attempt to repair this monitor or other components.
This may cause an inaccurate reading.
• DO NOT use in a location where there is moisture or a risk of water splashing
this monitor. This may damage this monitor.
• DO NOT use this monitor in a moving vehicle such as in a car or on an aircraft.
• DO NOT drop or subject this monitor to strong shocks or vibrations.
• DO NOT use this monitor in places with high or low humidity or high or low
temperatures. Refer to section 10.
• During measurement, observe the arm to ensure that the monitor is not
causing prolonged impairment to blood circulation.
Important Safety Information
EN
EN6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents