Correction Menu; Help Menu - Microtek ScanMaker 3600 User Manual

memory in your application for this purpose; otherwise, ScanWizard
5 may not have enough memory to run. Use this option only if you
do not want ScanWizard 5 to use memory outside your application.
System:
ScanWizard 5 will use the memory in the system heap as its image
buffer, with a limited amount of memory used in the application
heap. This option is best if you have only a small memory allocation
for your application but a large amount of system memory.
Scratch Directory
(for Macintosh only)
The scratch directory is the folder where ScanWizard 5 creates
temporary files; these files are deleted at the end of scanning
session. You should change to a different folder only if the scratch
directory is located in a disk volume that is too small for scanning
operations. To specify a new scratch directory, choose Other
Directory... from the menu.

Correction menu

The Correction Menu lets you use the Advanced Image Correction
(AIC) features of ScanWizard 5. The commands in the Correction
menu correspond to the AIC buttons in the Settings window.

Help menu

The Help menu lets you access on-line help for ScanWizard 5, and
gives you information on the ScanWizard 5 scanning software.
File menu
(for Macintosh only)