Custom Settings; Revert Button - Microtek ScanMaker 3600 User Manual

setting of the scan job is restored to its default; but the altered
shadows and highlights remains in effect. If you reset both
white/black points and brightness, then those values are both
restored to default.

Revert button

This button cancels out the changes that were made with the
current image-enhancement tool. This means that if you used
several AIC tools, Revert cancels the effect of only the last used (or
current) tool, and preserves the effects of the other preceding tools.
Example: If you changed the tone curve, applied filters, changed
brightness, then clicked Revert, the brightness changes will be
cancelled out, but the altered tone curve and filters settings remain
in effect.
Add to Menu button
This button adds the settings you have performed to the menu in
the Settings window, so that you can retrieve and load the settings
in the future if necessary.

Custom Settings

You can also create custom settings in each Advanced Image
Correction control, and then add them to the Settings window
menus for quick access to those settings.
To create a custom setting:
1. Choose the desired AIC control (e.g., Tone Curve, etc.) in the
Settings window, and select Custom from the drop-down
menu on the right side.
2. When the AIC dialog box for the selected control comes up,
adjust the setting the way you want it, then click the Add to