Multiple Auto-Crop For Ez-Lock Film Holder - Microtek ScanMaker 3600 User Manual

Settings window should be the same.
2. All the scan jobs should have the same scan type. For
example, the scan type can be either color (RGB or RGB 48-
bit) or gray (Gray or Gray 16-bit).
3. The Digital ICE function, if available, should be disabled.
4. If the screen filter is applied, all the scan jobs should use the
same descreen lpi value.
If ScanWizard 5 has detected that your image original does not
meet the above conditions, the "One-pass Scan for Multiple Jobs"
option is dimmed and will not be available for selection.

Multiple Auto-crop for EZ-Lock Film Holder

only)
This option is enabled only when the EZ-Lock film holder is placed
on the scanner glass surface, and the scan material is Positive or
Negative Film. Otherwise, this option is disabled. Check this option
to enable the scanner to auto-crop multiple scanning frames.
To perform a mulitple auto-crop preview of the film loaded onto the
scanner, click the Overview button. When done, you will see
multiple scan frames that have been automatically cropped in the
preview window. Multiple job titles will appear in the Scan Job
Queue window, numbered sequentially and all marked by a "Check"
that indicates the jobs are ready to be scanned.
(for Windows