Using The 6 X 9 Cm Filmstrip Holder - Microtek ArtixScan 120tf Installation And Operation Manual

Using the 6 x 9 cm Filmstrip Holder

The 6 x 9 cm filmstrip holder allows you to scan varying sizes of transparencies,
including 6 x 4.5 cm, 6 x 6 cm, 6 x 7 cm, and 6 x 9 cm. The maximum number of film that
can be loaded depends on the size of your film (e.g., the 6 x 4.5 cm can hold up to 4
pieces of film; 2 pieces for the 6 x 9 cm film).
1. Push to open the holder.
2. Flip the 35mm filmstrip face down and place it into the holder and ensure that the
3. Close the holder lid and lock it by sliding it toward the side (indicated by an arrow
12 ArtixScan 120tf Installation and Operation Manual
filmstrip's edge is against the side of the holder.
mark).