Microtek ArtixScan 120tf Installation And Operation Manual page 13

For PC users
4. Set the scanner's terminator switch to the "ON" position.
ON
OFF
SCSI TERM
5. Connect the power cord to the scanner.
Plug the power cord into the back of the scanner, and plug the other end into a
wall outlet or power source.
6. Turn on the scanner, and wait for the lights on the front
panel to stop blinking and stay on steady.
7. Turn on the computer; the system will detect the
scanner automatically.
6
+
Note: If you have multiple devices on
your SCSI chain, make sure the scanner
is the last device on the chain and that
the scanner is terminated (i.e., scanner's
terminator switch is set to ON).
ArtixScan 120tf Installation and Operation Manual
Power button
9