2. Connect the scanner to your computer, using the provided FireWire cable.
Connect one end of the FireWire cable to your computer's FireWire port, and
connect the other end of the cable to the scanner's FireWire port.
For Macintosh users
For PC users
3. Press the power button on the front panel, and wait for the lights to stop blinking
and stay on steady. The scanner will be detected by your system automatically.
6
+
6
+
Power button
ArtixScan 120tf Installation and Operation Manual
The latest
Macintosh
computers (i.e., G3,
G4, later-generation
iMacs, etc.) are
equipped with a
built-in FireWire
port, usually labeled
with the " " logo.
7