Toshiba GR-200 Series Instruction Manual page 1049

Rev. and Section
Date (page)
Chap. 10.2
Chap. 11.1
Chap. 11.2
Chap. 11.3
Chap. 11.4
Chap. 11.5
Chap. 12.2
Chap. 12.9
Appendix 5
Appendix 6
Appendix 7
Chap. 2.6
Chap. 5.4
Chap. 9.11
Chap. 11.4
Chap. 12.2
0.10
Oct, 15 2020 Chap. 12.6
Chap. 12.7
Chap. 13
Appendix 3
Appendix 5
Chap. 2.1
Chap. 2.3
Chap. 9.11
0.11
Feb, 28 2021
Chap. 11.2
Appendix 7
0.12 Chap. 2.1
Jul, 26 2021 Chap. 2.2
Change place and contents
supervision function in Table 10.2-44
Added IEC103 information of Automatic supervision
function in Table 10.2-62
Added the selection of IEC103 protocol using LCD
menu in Figure 11.1-1
Deleted LAN information for the local PC in Table
11.2-2 and setting list of sec. 11.2.4
Modified the Qual_validity information in Fig. 11.3-
29
Added the SLAVE PROTOCOL setting item in the
LCD screen of Fig. 11.4-3, 11.4-4 and 11.4-7
Added the contents about the IEC 60870-5-103
communication protocol
Added the contents about the IEC 60870-5-103 in the
Menu hierarchy tree in Fig. 12.2-2
Added both Modbus and IEC103 in information sub-
menu in table 12.9-1
Added information about the IEC 60870-5-103
Revised ordering information about the selection of
outline, voltage, and network module etc.
Revised the information
communication module, CE certification etc.
Corrected the value of UCDP element threshold in
Fig. 2.6-1 & 2.6-2
Removed the Faraday shield in transformer modules
of VCT3A and VCT3B in Fig. 5.4-2, -3 and -4
Refined the signals for TIEMS, fault recording,
IEC61850 and Modbus in Monitoring function
Corrected the setting notice of Mosbus RTU in Figure
11.4-5
Information of the mark appeared on the far right in
the sub-menu. Added Figure 12.2-3
Corrected the menu of the LED3 setting screen in
Figure 12.6-11
Added Modbus Sync item on Time sub-menu for the
time sync menu.
Removed the Faraday shield of VCTs in the
connection diagrams in Fig. 13.3-3 & Fig. 13.4-1
Removed the Faraday shields of VCTs in the typical
external connection diagrams
Moved and inserted the Modbus address information
from Chap. 11 to Appendix 5
Corrected OC1 scheme logic about the instantaneous
operation in Fig. 2.1-8
Corrected current reversal logic of Fig. 2.3-3 in
DEFCAR function
Revised the signals of metering items in the metering
function
Added the information about the IEC61850 CID file
for the Goose and LAN settings
Corrected the name of earth fault protection function
in Ordering information table
Modified phase angle setting range to "-90 to +
90deg".
Approved
Y. Sonobe
Y. Sonobe
Y. Sonobe
Y. Sonobe
Y. Sonobe
Y. Sonobe
Y. Sonobe
Y. Sonobe
Y. Sonobe
Y. Sonobe
of Power supply, Y. Sonobe
Y. Sonobe
Oct 15
Y. Sonobe
Aug 14
Y. Sonobe
Sep. 17
Y. Sonobe
Sep 30
Y. Sonobe
Sep 30
Y. Sonobe
Sep 30
Y. Sonobe
Sep 30
Y. Sonobe
Aug 14
Y. Sonobe
Aug 14
Y. Sonobe
Sep 30
H. Amoh
Jan. 28
H. Amoh
Oct. 30
Y. Sonobe
Feb 24
H. Amoh
Oct. 30
Y. Sonobe
Feb 24
Y. Sonobe
Jul. 26
Checked by
by
Jul 17 Jul 16
Y.Yanagihashi
Jul 17 Jul 16
Y.Yanagihashi
Jul 17 Jul 16
Y.Yanagihashi
Jul 17 Jul 16
K.Kobayashi
Jul 17 Jul 16
Y.Yanagihashi
Jul 17 Jul 16
Y.Yanagihashi
Jul 17 Jul 16
Y.Yanagihashi
Jul 17 Jul 16
Y.Yanagihashi
Jul 17 Jul 16
Y.Yanagihashi
Jul 17 Jul 16
Y.Yanagihashi
Jul 17 Jul 16
Y.Yanagihashi
Jul 17 Jul 16
Y.Yanagihashi
Oct 15
Y.Yanagihashi
Aug 14
K. Kobayashi
Sep. 9
K.Kentaro
Sep 10
K.Kentaro
Sep 7
K.Kentaro
Sep 7
K.Kentaro
Sep 7
Y.Yanagihashi
Aug 14
Y.Yanagihashi
Aug 14
K.Kentaro
Sep 7
M. Gordon
Jan. 28
Y. Sonobe
Oct. 30
Y.Yanagihashi
Feb 24
M. Okai
Oct. 30
Hong Lan
Feb. 24
Y. Sonobe
Jul. 26
Prepared
by
Jul 7
T. Kaneko
Jul 7
T. Kaneko
Jul 7
T. Kaneko
Jul 7
T. Kaneko
Jul 7
T. Kaneko
Jul 7
T. Kaneko
Jul 7
T. Kaneko
Jul 7
T. Kaneko
Jul 7
T. Kaneko
Jul 7
T. Kaneko
Jul 7
T. Kaneko
Jul 7
T. Kaneko
Oct 14
T. Kaneko
Aug 7
T. Kaneko
Sep. 9
T. Kaneko
Aug 24
T. Kaneko
Sep 4
T. Kaneko
Sep 4
T. Kaneko
Sep 4
T. Kaneko
Aug 7
T. Kaneko
Aug 7
T. Kaneko
Sep 4
T. Kaneko
Jan. 28
T. Kaneko
Oct. 30
T. Kaneko
Feb 9
T. Kaneko
Oct. 30
T. Kaneko
Feb. 4
G. Suzuki
Jul. 26