Toshiba GR-200 Series Instruction Manual page 1026

Ordering information (3/6)
[Software selection]
Configurations
VCT type
Assignment at '7' position†
Function block
See Function table†
Network / Time Sync. module
Assignment at 'E' position†
Assignment at 'F' position†
Protocol
IEC 61850 or Modbus or IEC60780-5-103†
IEC 61850
Outline
Assignment at '9' position†
Language
English
1†Choice is made at '7' positon in 'Hardware selection' on Page 1005.
2†Choice is made by seeing 'Functional tables' on Page 1007.
3†Choice is made at 'E' and 'F' positons of 'Hardware selection' on Page 1006.
4†A slave protocol—such as IEC60870-5-103, Modbus—can be selected by the user's setting. If the
slave protocol via a RS485 or fiber optic communication is required, the RS485 or fiber optic
module has be mounted in the IED. That module will be selected by the code at 'E&F position
(see Page 1006).
5†Choice is made at '9' positon of 'Hardware selection' on Page 1005.
G R E 2 0
1
2
3
3
4
5
- 1007 -
Positions
7 S G T
0 5 -
0 -
5
6F2T0200 (0.15)
E F U 9 V
- E
1
2
E
GRE200 (1,2)